Precautions of Conduit Wiring

Precautions of Conduit Wiring Points : Precautions of Conduit Wiring

1. The metal pipes or conduits are terminated in metal-clad board with a smooth bore brass bush or ring brass bush.
2. Before drawing the cables in conduit, make sure that there is no moisture is present in interior of the conduit.
3. If two or more than two conduits are run in parallel then multiple saddles must be used.
4. When extra large lengths of conduit are run then must be provide the inspection points on this conduit.
5. In case of steel conduit, electrical continuity is essential for earthihg.
6. Always use the steel wire to draw the cables through steel or P.V.C conduit.
7. In case of steel conduit the sharp edges of the conduit must be smooth.
8. Use the correct size of saddle according to diameter of conduit.
9. In case of steel conduit, curves the conduit be carefully.
10. Select the exact routes before installation of conduit.
11. When curves the conduits then elbows or bends are used.
12. Always draw the exact number of wires into conduit.
13. Always select the correct size of conduit.