Method of Batten Wiring Installation

Method of Batten Wiring Installation Points : Method of Batten Wiring Installation First of all, draw the straight lines with coloured thread on walls of the building. Always draw the lines to the height of 3m bove the ground surface. In any condition, the distance cannot duce to this specified limit. After that with the help of electric drill machine make the holes to the marked point on the wall. The distance between these holes is 30cm or 60cm and all the holes are made on equal distances to each other Rawal plugs are inserted in holes. Cut the batten with the help of wood saw to required length. Now connect the steel clips with nails on the surface of the batten to equal distance. Batten is installing on the walls of the building. A 1.5 inch screws are used to installation of batten on the walls. Installation the cables on e batten and tight the clips. All the switches, sockets, lamp holders, ceiling rose, main switch are installed on wooden round rocks. In last whole wiring is tested with megger.