Casing Capping Wiring Installation Method

Casing Capping Wiring Installation Method Points : Casing Capping Wiring Installation Method First of all draw the lines on the walls with coloured thread. Made the holes on the wall at the distance of 1 meter and these holes are made on equal distances from each other. Rawal plugs are inserted in these holes with hammer and then casing is screwed on the all. Remember that a insulation or washel is used between casing and wall. Cables are inserted in the grooves of the casing in straight position. Phase and neutral wires are inserted i separate grooves. Always, start the installation of cables in grooves from the last groom. If wiring is installed on the roof then first start the wiring on the roof and in last main hoard V cable is installed. Switches, sockets, ceiling rose, lamp holders, and main switches are fitted on the wooden block. In last caping is fitted on the casing and screwed. The 0,5 inch screw is use to screwed the caping on the casing.