Precautions of Cleat Wiring

Precautions of Cleat Wiring Points : Precautions of Cleat Wiring

1. The cap, is not tightly screwed on the base because insulation of cables is damaged and not as loosely screw that as a result the cables are producing sag.
2. If cables are passing through under the water pipes, walls or roofs then cables are always passing through met conduits.
3. Cleat wiring is not suitable for those places where smoke, steam, dust and risk of mechanical injury is present.
4. Switches, sockets, cut out, ceiling rose and lamp holder is always installed on round wooden blocks.
5. The distance between branch circuits for single-phase supply (220V) is not less than 2.5cm ad for sub main 4cm minimum.
6. Always use the wooden bushing on each end of the conduit.
7. Do not install this wiring in stores and flammable places.
8. The cables are lying straight in cleats.