Precautions in handling the Tools

Precautions in handling the Tools Points : precautions in handling the tools, precautions in handling electrical tools, safety precautions in handling power tools, safety precautions in handling tools Great caution and care are acquired in handling tools. A worker is liable to injure himself in addition to the damage caused to the tools. If the at any time is slacked in handling them. The following are the safety precautions in the handling of tools.

1. The sharp edged tools such as pocket knife, chisels, scratching awl should never be put in pocket without shield, and while working with such tools, care should be taken not to place hand or finger in the path of motions of the cutting tool. Also care should be taken not to hand over the sharp-edge tools with its sharp edge first.
2. When making a cut with a saw, the cut must be guided with a finger and thumb of one hand, otherwise the blade is liable to brake which may cause serious injuries.
3. Only a suitable tool should be used for the proper purpose and if a particular tool does not suit the purpose, do not abuse the tool; try to have a new tool matching.
4. After using tools, they should never be left a the top of the ladder or any other place since they may fall accidentally and cause injury.
5. When cutting with a chisel, always cut away from you rather than towards yourself.
6. Before using a hammer, its handle must he examined, whether it is properly secured or not.
7. All injuries must be attended to immediately, since delay may cause infection.